So with a humungous glass sculpture inside, my little Skutt GM1414 decides to pull a fast one. Or rather a slow one…

Stopped back from BECon to feed the cats on the way to Bullseye’s Lehr BBQ (which was a blast, BTW) and to make sure the kiln as firing on schedule.

It wasn’t.

Instead, I found a big “Err1” flashing on the controller and the kiln was still below 300 degrees (or maybe it went up and back down). So…shut down and I’ll talk to Skutt first thing Monday morning. Probably a relay.

Drat. Two days lost. Ain’t no way this thing can be moved without disrupting the glass (or possibly the mold) so it’ll have to wait on fixing the kiln.

Dad-gummit.